Film Light Accessories – CineTechGear

USB to 12V Adapter

heath — Mon, 09 May 2022 04:22:47 +0000

This is an adapter that allows you to run one MiniCine Light off of a USB power bank. You can see it being used in the rotating videos where the light is powered. It has a 3' cable, and works great when you don't have electricity or a 12V battery source.

Eggcrate Retention Ring for MiniCine Light

heath — Fri, 06 May 2022 17:16:50 +0000

Barn Doors for MiniCine Light

heath — Fri, 06 May 2022 16:51:34 +0000

These are the standard barn doors for the MiniCine Light. They are the most compact version, but do not close over the eggcrate. they will close over regular filters, and I think they look the coolest. They close completely flat and can be removed by loosening one screw. The amount of friction for rotation is adjusted with the same screw, which uses a captive locking nut, meaning it has a nylon insert so it won't come loose. Similarly the barn door tension can also be adjusted and also uses locking nuts, but a wrench or pliers will be needed to make this adjustment as these nuts are not captive.

Lantern Diffusion for MiniCine Light

heath — Fri, 06 May 2022 16:15:53 +0000

This is a little lantern diffusion adapter I designed for when we are camping. It not only provides a nice diffusion softening the light, but it also spreads the light in a wide pattern. I hang it from the middle of our tent, and it provides a great light to light up everything in the tent. This is kind of the opposite of all of the other light modifiers which are generally designed to control the light, as it both softens the light and gives maximum spread, making it a good overhead light adapter.

Tabletop Mic Stand with Baby Adapter

heath — Fri, 06 May 2022 15:52:09 +0000

This is a great option if you are using the light on a desktop or for tabletop gaming. It doesn’t have the same look as the lightstand option, but has a smaller footprint, and a heavier base, so this is what I use at my editing desk. It is simply a desktop mic stand, with a baby adapter screwed to the 3/8″ stud. This works best with the 45° yoke mount since that mount allows the light to point almost straight down without shifting the weight too far off axis, making it extra stable.

Tabletop Light Stand

heath — Fri, 06 May 2022 15:48:56 +0000

Not only is this tiny tripod fully functional, but it looks great too. Ideal for use with the MiniCine Light with 45° Yoke mount, which allows the light to aim almost straight down, and makes your desk look like a filmset.

MiniCine Light Filter Holder

heath — Mon, 04 Apr 2022 00:10:18 +0000

We recognize that you may have your own favorite filter and shouldn't have to use c-47's to hold them to your barndoors. Since their are tons of filters, it isn't practical for us to make them all, at least at this point, but that shouldn't stop you from being able to make your own. All you really need is the holder, your filter of choice, some scissors and a little superglue. So, we are making the filter holder available to you.

12V Stackable Battery with 3 – 1/4″ 20 Mounting Holes

heath — Sun, 03 Apr 2022 23:21:48 +0000

This battery can run one MiniCine Light at full power for at least 16 hours. It is stackable, and has three 1/4" 20 mounting holes, so you can use it with an articulated arms so that is can act as the base for up to three MiniCine Lights. I recommend it as a desktop style portable light stand and base when paired with an articulated arm. While the case is 3D Printed, the 1/4" 20 holes are a drilled into a 1.5" x 4" single 1/4" steel plate, which gives a lot of strength and a bit more ballast, since you are using the battery as a base. Since all lithium-ion batteries have a limited number of recharge cycles, usually around 2000, when the battery finally wears out, your can easily replace the battery in the case instead of having to buy a whole new one. We really are trying to reduce waste and make our products user serviceable.

10′ 12V Flat Extension Cable

heath — Sun, 03 Apr 2022 00:01:10 +0000

12V 3-Way Adapter

heath — Sat, 02 Apr 2022 23:47:40 +0000